KSC-SW1
Powered Subwoofer System with Passive Radiator
DISCONTINUED MODEL
Key Features
| 160mm Silver-coated Cone Woofer |
| Passive Radiator System |
| Aluminium Die-cast Chassis |
| 150W Maximum Output Power |
| Supplied with Wired Remote (Gain/LPF Frequency/Phase Switch) |
Speaker Features
| Speaker System | Active subwoofer system with Passive radiator |
| Speaker Type | Subwoofer |
| Speaker Size | 160mm |
| Oversized Dimension | Yes |
| Passive radiator system | Yes |
| Magnet Type | Ferrit |
| Terminals | 10-pin connector cord |
| Wired remote included | Yes |
| Cross-over Network | Built-in |
| Amplifier Included | Built-in |
Amplifier Features
| Maximum power output | 150W |
| Low-pass Filter | Yes |
| Phase inverter 0°(Normal) / 180°(Reverse) | Yes |
| Power Indicator | on the remote |
| Line in | RCA |
| Speaker level Input | Yes |
| Chassis | Aluminum Die-cast |
| Yes | |
| DC cable Supplied | yes |
Speaker/woofer Specifications
| Woofer Cone material | Silver-coated Cone |
| Aluminum Die-cast | |
| Subwoofer Impedance | 2Ω x 2 |
Amplifier-Specifications
| Maximum power output (4Ω) | 150W x 1 |
| RCA Input Sensitivity | 0.05 ~ 1V |
| Input Impedance | 2.2kΩ |
| Signal to Noise Ratio | 85dB |
| Frequency response (+0dB, -3dB) | 35Hz ~ 120Hz |
| Operating voltage | 14.4V (10.5V ～ 16V allowable) |
| Maximum current consumption | 8A |
| Dimensions (WxHxD) | 400 x 91 x 228(mm), |
| Weight | 3.6kg |
Accessories
| Remote control | |
| Bracket A: 2 pieces | |
| Bracket B: 2 pieces | |
| Bracket C: 1 piece | |
| Cushion: 2 pieces | |
| Machine screw (M4x6): 6 pieces | |
| Tapping Screw (5x16): 6 pieces | |
| 10-pin connector cord | |
| Velcro Tape: 1 piece | |
| RCA Cord: 0.5 meter |